Rail System FLS 25

The result of consequent further development in the field of mechanical systems for microoptics applications is the rail system FLS 25. With this system, linear and planar structures can be realized and mounted optics with a diameter of 16 mm directly taken into a carrier. The compatibility with the LINOS nanobench system enables the application of a large number of structure components like mirror and prism adjusters, positioning units and fiber adapters. The optical axis of the total system is 20 mm above the work surface.  

Rail FLS 25

The extruded profile with its high degree of straightness and low torsion also has a high degree of levelness due to the precise processing of all guide and bearing surfaces. The black anodized rail profile has oblong holes so that it can be attached to work surfaces with metric or inch standard threads as well as independent of the pattern. The rail FLS 25 is available in lengths of 50 mm to 500 mm.

 

Carrier FLR 25

The carrier FLR 25 serves for direct take-up of mounted optics with a diameter of 16 mm. The carrier is also equipped with four borings in a 16 mm pattern. These serves to take up the rods of the nanobench and are therefore the interface to this system. A large number of different structure components of the nanobench system can be mounted on the rail. A spring-mounted lever fixes the carrier on the rail. When the knurled head screw is loosened, the carrier can be moved easily and jerk-free due to the spring tension. By tightening the knurled screw, the carrier can be arrested in a position.

Flat Rail System FLS 25